Toggle Action
The theoretical maximum holding or clamping force of a toggle action device is achieved when the 3 pivot points are in a straight line. To make allowance for external forces due to vibration and changing load conditions in industrial applications, the proper amount of over-travel at the centre pivot point has been carefully calculated to yield maximum clamping pressure, while achieving a positive locking position.
Holding Capacity & Clamping Force
All Good Hand Clamps are rated by their holding capacity. This rating is the maximum force the clamp will support when locked in the closed position without creating permanent deformation. This force is measured at a point closest to the base and diminishes as the end of the bar is reached. The clamping force is defined as the actual force being applied by the clamp to the work piece. This rating is not constant due to such variables as the location of force on the handle, amount of force the operator applies and the location of the spindle on the hold-down bar.
Features:
Brand: Uhing (made in Germany)
The RG series of Rolling Ring Drives are the original aluminum bodied traversal units. They are friction drives which convert the constant rotation of a plain round shaft into reciprocating motion. A unique technology first invented by Uhing from Germany, widely used in the Wire and Cable Winding industry.
They operate like nuts on a threaded bar, however the pitch both left and right-hand is capable of fine adjustment or set to zero.
This effect is achieved by using ball bearing based Rolling Rings which are designed to pivot about the shaft, their specially crowned running surfaces being pressed against the shaft as it rotates. High quality product made in Germany by Uhing.
Main advantages of the Uhing Rolling Ring Principle:
*at constant speed and direction of shaft rotation
The RGK series of Rolling Ring Drives are the latest generation of high-tech plastic bodied traversal units. Designed and built to be cost effective, their durability upholds proudly the brand of quality that Uhing has built over the decades.
RGK Rolling Eing Drives look to remove the stigma that metal is better. They are friction drives which convert the constant rotation of a plain round shaft into reciprocating motion. A unique technology first invented by Uhing from Germany, widely used in the Wire and Cable Winding industry.
They operate like nuts on a threaded bar, however the pitch both left and right-hand is capable of fine adjustment or set to zero.
This effect is achieved by using ball bearing based Rolling Rings which are designed to pivot about the shaft, their specially crowned running surfaces being pressed against the shaft as it rotates. High quality product made in Germany by Uhing.
Main advantages of the Uhing Rolling Ring Principle:
*at constant speed and direction of shaft rotation
In partnership with COBOTSYS from Korea,
we provide affordable Automation Solutions
via System Integration and Redesign of Work Processes.
Step 1: Discovery
Step 2: Consultation
Step 3: Proposal (2 weeks leadtime)
Contact us today for an obligation-free consultation!
Brand: Uhing (made in Germany)
Uhing Linear Drive Nuts (RS) are non-positive drives which convert the rotation of a plain round shaft into linear motion. This effect is achieved by pressing specially crowned Rolling Rings against the shaft and allowing them to roll on the surface of the shaft at an angle which determines the pitch.
Suitable for use as an actuator for: linear motion drives, measurement and inspection technology, materials handling systems, control systems, medical engineering etc.
Main advantages of the Uhing Linear Drive Nuts:
The FAEBI® Rubber Air Springs provides highly effective insulation of vibrations and structure-borne noise for a wide variety of machine types, optical and electronic devices, laser systems as well as vehicle, engine and transmission test benches.
Low-frequency air springs from Bilz provide highly effective vibration isolation and can be combined with a variety of mechanical and electronic level control systems.
The damping level of the pneumatic and low-maintenance air springs can be adjusted as required.
In comparison to steel springs the use of air spring offers many advantages when used for vibration insulation:
Brand: Sigma Koki (made in Japan)
The SGSP Series of motorized stages incorporate 5 phase stepping motor and high-precision guide actuators to provide precise movements.
The stages are available in range of travel lengths and load capacities to meet your demanding requirements.
Uni-shaped construction with integrated rail is precision honed to provide maximum stability.
This construction results in a structure that resists the effects of pitch and yaw to provide the stability required for many applications.
Sigma Koki offers a large variety of motorized positioning solutions, suitbale for laboratory and OEM applications.
This unique air-gun attachment works more efficiently than a regular air-gun in dewatering, particles removal, cleaning etc.
PATA-Gun is equipped with a patented technology (2006-79234) and emits intermittent shock waves in broad angles, achieved by the high-speed rotation of its air spouting nozzle.
Detailed application examples and video here!
Effectively saving air consumption and time!
That is the reason why is it also known as the ECO-Gun.
Capable of 4 times the range of a conventional air-gun, you can easily shave off 2/3 of your electrical bill.
The Sutcliffe shields, with all surfaces non-reflective for safe use with the laser, come in many configurations for various applications.
The same basic piece is available modified in design to shield different parts of the body. You can shield eyelashes, eyebrows, eyelids, feckles, lips, gums, teeth etc. or any tissue (deep or superficial) needing protection.
Useful during skin resurfacing, incisional procedures, skin depigmentation etc. In surgery, they can serve as an instrument for retracting tissue and as a backstop.
You will discover many uses for it, the bent model is easier to pick up when gloved.
The Sutcliffe-Boey all-in-one laser shield is perforated to allow it to shield lesions and freckles by limiting the size of the laser beam.
Our best-selling microscope, the SZ2 Series features great performance, high quality and cost-effectiveness.
It is ideal for schools, scientific research institutes and industrial field. SZ2 can generate a high definition stereo.
image with large depth of view. The horizontal dual zoom knobs with detents are comfortable and easy to use.
Standard models as a system are available for your easy selection but its modular nature also allows us to customize for you.
The binocular and trinocular heads provided with zoom optics represent the heart of the SZ2 series.
These are backed by numerous types of bases and stands suitable to many applications.
A wide range of illuminations and imaging options increases the upscaling capabilities of this microscope.
SZ3 Stereo Zoom Microscope features good performance and high quality at the most reasonable pricing.
Ideal for schools, research and industrial visual inspection tasks.
Low to mid magnification range from 7X – 45X makes this Microscope capable of a wide range of applications.
Quality optics generate high definition stereo (3D) images with good depth of view.
The horizontal dual zoom knobs with detents are practical and ergonomic to use.
Two pre-configured systems are offered at no frills to save you the hassle of tedious selections.
Either the Binocular Microscope (SZ3-110) or the Trinocular Microscope (SZ3-1100).
Brand: Sigma Koki (made in Japan)
Developed from Sigma Koki’s performance-proven all-in-one guide with high rigidity.
Lightweight and cost-effective precision stages made in Japan is now available!
High accuracy ensures smooth travel, optimal for positioning and alignment applications.
The TADC range is an improvement in quality over TAM (aluminum crossed roller bearing stages).
A steel ball travelling on R grooves while in contact at 4 points secures stabilized load capacity in any direction.