Brand: Uhing (made in Germany)
Uhing Linear Drive Nuts (RS) are non-positive drives which convert the rotation of a plain round shaft into linear motion. This effect is achieved by pressing specially crowned Rolling Rings against the shaft and allowing them to roll on the surface of the shaft at an angle which determines the pitch.
Suitable for use as an actuator for: linear motion drives, measurement and inspection technology, materials handling systems, control systems, medical engineering etc.
Main advantages of the Uhing Linear Drive Nuts:
|Model Number||Shaft Daimeter (mm)||Side Thrust (N)||Maximum Pitch per revolution (mm)||Idling Torque (Ncm)||Weight (kg)|
Step One: Select your desired model from the above table
Step Two: Select the Direction of Shaft Rotation, either Left (L) or Right (R)
Step Three: Select the pitch based on your requirements, available pitch – 0.1, 0.2, 0.3, 0.4 or 0.5 (this is the standard) of the shaft diameter
Step Four: Decide if you require a Free Movement Lever (F)
Example of complete part number