Toggle Action

The theoretical maximum holding or clamping force of a toggle action device is achieved when the 3 pivot points are in a straight line. To make allowance for external forces due to vibration and changing load conditions in industrial applications, the proper amount of over-travel at the centre pivot point has been carefully calculated to yield maximum clamping pressure, while achieving a positive locking position.

Holding Capacity & Clamping Force

All Good Hand Clamps are rated by their holding capacity. This rating is the maximum force the clamp will support when locked in the closed position without creating permanent deformation. This force is measured at a point closest to the base and diminishes as the end of the bar is reached. The clamping force is defined as the actual force being applied by the clamp to the work piece. This rating is not constant due to such variables as the location of force on the handle, amount of force the operator applies and the location of the spindle on the hold-down bar.

Features:

• Hand grips are covered with an oil/stain resistant red vinyl for easy identification and to assure safety and comfort for the operator
• All die-stamped steel parts are deburred, cleaned and zinc-plated finish to resist corrosion and creates a smooth and easy to clean surface
• Heavy-duty rivets are used to maintain accuracy and to increase endurance
• All heavy-duty clamps receive hardened ground pins and bushings
• Flanged washers are supplied with all U-bar and open-bar models
• Weld-on bolt retainers are supplied with all solid bar models
• Toggle mechanism is designed to allow maximum clearance for ease of loading and unloading of work piece

Toggle Action

The theoretical maximum holding or clamping force of a toggle action device is achieved when the 3 pivot points are in a straight line. To make allowance for external forces due to vibration and changing load conditions in industrial applications, the proper amount of over-travel at the centre pivot point has been carefully calculated to yield maximum clamping pressure, while achieving a positive locking position.

Holding Capacity & Clamping Force

All Good Hand Clamps are rated by their holding capacity. This rating is the maximum force the clamp will support when locked in the closed position without creating permanent deformation. This force is measured at a point closest to the base and diminishes as the end of the bar is reached. The clamping force is defined as the actual force being applied by the clamp to the work piece. This rating is not constant due to such variables as the location of force on the handle, amount of force the operator applies and the location of the spindle on the hold-down bar.

Features:

• Hand grips are covered with an oil/stain resistant red vinyl for easy identification and to assure safety and comfort for the operator
• All die-stamped steel parts are deburred, cleaned and zinc-plated finish to resist corrosion and creates a smooth and easy to clean surface
• Heavy-duty rivets are used to maintain accuracy and to increase endurance
• All heavy-duty clamps receive hardened ground pins and bushings
• Flanged washers are supplied with all U-bar and open-bar models
• Weld-on bolt retainers are supplied with all solid bar models
• Toggle mechanism is designed to allow maximum clearance for ease of loading and unloading of work piece

Toggle Action

The theoretical maximum holding or clamping force of a toggle action device is achieved when the 3 pivot points are in a straight line. To make allowance for external forces due to vibration and changing load conditions in industrial applications, the proper amount of over-travel at the centre pivot point has been carefully calculated to yield maximum clamping pressure, while achieving a positive locking position.

Holding Capacity & Clamping Force

All Good Hand Clamps are rated by their holding capacity. This rating is the maximum force the clamp will support when locked in the closed position without creating permanent deformation. This force is measured at a point closest to the base and diminishes as the end of the bar is reached. The clamping force is defined as the actual force being applied by the clamp to the work piece. This rating is not constant due to such variables as the location of force on the handle, amount of force the operator applies and the location of the spindle on the hold-down bar.

Features:

• Hand grips are covered with an oil/stain resistant red vinyl for easy identification and to assure safety and comfort for the operator
• All die-stamped steel parts are deburred, cleaned and zinc-plated finish to resist corrosion and creates a smooth and easy to clean surface
• Heavy-duty rivets are used to maintain accuracy and to increase endurance
• All heavy-duty clamps receive hardened ground pins and bushings
• Flanged washers are supplied with all U-bar and open-bar models
• Weld-on bolt retainers are supplied with all solid bar models
• Toggle mechanism is designed to allow maximum clearance for ease of loading and unloading of work piece

This unique air-gun attachment works more efficiently than a regular air-gun in dewatering, particles removal, cleaning etc.

PATA-Gun is equipped with a patented technology (2006-79234) and emits intermittent shock waves in broad angles, achieved by the high-speed rotation of its air spouting nozzle.

Detailed application examples and video here!

Effectively saving air consumption and time!

That is the reason why is it also known as the ECO-Gun.

Capable of 4 times the range of a conventional air-gun, you can easily shave off 2/3 of your electrical bill.

Brand: Good Hand

Toggle Action

The theoretical maximum holding or clamping force of a toggle action device is achieved when the 3 pivot points are in a straight line. To make allowance for external forces due to vibration and changing load conditions in industrial applications, the proper amount of over-travel at the centre pivot point has been carefully calculated to yield maximum clamping pressure, while achieving a positive locking position.

Holding Capacity & Clamping Force

All Good Hand Clamps are rated by their holding capacity. This rating is the maximum force the clamp will support when locked in the closed position without creating permanent deformation. This force is measured at a point closest to the base and diminishes as the end of the bar is reached. The clamping force is defined as the actual force being applied by the clamp to the work piece. This rating is not constant due to such variables as the location of force on the handle, amount of force the operator applies and the location of the spindle on the hold-down bar.

Features:

• Hand grips are covered with an oil/stain resistant red vinyl for easy identification and to assure safety and comfort for the operator
• All die-stamped steel parts are deburred, cleaned and zinc-plated finish to resist corrosion and creates a smooth and easy to clean surface
• Heavy-duty rivets are used to maintain accuracy and to increase endurance
• All heavy-duty clamps receive hardened ground pins and bushings
• Flanged washers are supplied with all U-bar and open-bar models
• Weld-on bolt retainers are supplied with all solid bar models
• Toggle mechanism is designed to allow maximum clearance for ease of loading and unloading of work piece

This unique air-gun attachment works more efficiently than a regular air-gun in dewatering, particles removal, cleaning etc.

PATA-Gun is equipped with a patented technology (2006-79234) and emits intermittent shock waves in broad angles, achieved by the high-speed rotation of its air spouting nozzle.

Detailed application examples and video here!

Effectively saving air consumption and time!

That is the reason why is it also known as the ECO-Gun.

Capable of 4 times the range of a conventional air-gun, you can easily shave off 2/3 of your electrical bill.

This model is the top of the range in terms of versatility, durability and ergonomics. An extremely high level of power, formidable airflow and quality features leave you wanting for nothing. The easy-to-read LCD display integrated at the rear is always in view.

Setting

• Temperature adjustment by pushbutton in 10°C steps.
• Blower controlled by 3-speed operating switch.
• Cool air stage for rapid cooling on changing nozzles.