Download detailed catalogue here
The Uhing® Timing Belt Drives are based on rigid aluminium sections that are resistant to torsion.
Several T-slots integrated in the carrier sections allow variable application and facilitate fitting.
Slide blocks can be easily inserted. Power is transmitted from the timing belt to the load carriage via the belt joint mounted on the load carriage.
Uhing timing belt drives are made of high-quality material, such as corrosion-proof, hardened guide rails and robust, dimensionally stable timing belts.
They are precise, allow accurate positioning, provide high acceleration rates and speeds and have a long life.
Numerous accessories and the Uhing® SMS 2010 positioning and sequence control system complete the range of products.
Brand: Uhing (made in Germany)
Fast action clamping system for rolls, spools and static application. The Uhing Easylock is fitted with a clamping ring which is increasingly offset to the shaft with which engages in response to axial or tensioning forces, so creating an increasing friction contact. The greater the tensioning force, the greater is the clamping effect of the ring.
As the roll or spool is held firmly betweeen the fixed cone and the clamping cone, braking moments are able to be transmitted from the shaft to the roll or spool. The machine can thus be stopped if a fault occurs.
Main advantages of Uhing Easylock:
Brand: Uhing (made in Germany)
The RG series of Rolling Ring Drives are the original aluminum bodied traversal units. They are friction drives which convert the constant rotation of a plain round shaft into reciprocating motion. A unique technology first invented by Uhing from Germany, widely used in the Wire and Cable Winding industry.
They operate like nuts on a threaded bar, however the pitch both left and right-hand is capable of fine adjustment or set to zero.
This effect is achieved by using ball bearing based Rolling Rings which are designed to pivot about the shaft, their specially crowned running surfaces being pressed against the shaft as it rotates. High quality product made in Germany by Uhing.
Main advantages of the Uhing Rolling Ring Principle:
*at constant speed and direction of shaft rotation
The RGK series of Rolling Ring Drives are the latest generation of high-tech plastic bodied traversal units. Designed and built to be cost effective, their durability upholds proudly the brand of quality that Uhing has built over the decades.
RGK Rolling Eing Drives look to remove the stigma that metal is better. They are friction drives which convert the constant rotation of a plain round shaft into reciprocating motion. A unique technology first invented by Uhing from Germany, widely used in the Wire and Cable Winding industry.
They operate like nuts on a threaded bar, however the pitch both left and right-hand is capable of fine adjustment or set to zero.
This effect is achieved by using ball bearing based Rolling Rings which are designed to pivot about the shaft, their specially crowned running surfaces being pressed against the shaft as it rotates. High quality product made in Germany by Uhing.
Main advantages of the Uhing Rolling Ring Principle:
*at constant speed and direction of shaft rotation
Brand: Uhing (made in Germany)
Uhing Linear Drive Nuts (RS) are non-positive drives which convert the rotation of a plain round shaft into linear motion. This effect is achieved by pressing specially crowned Rolling Rings against the shaft and allowing them to roll on the surface of the shaft at an angle which determines the pitch.
Suitable for use as an actuator for: linear motion drives, measurement and inspection technology, materials handling systems, control systems, medical engineering etc.
Main advantages of the Uhing Linear Drive Nuts:
Shaft collar for smooth shafts/tubes. The Uhing U-Clip is the simple and low-priced version of the Uhing clamping systems. It uses a clamping ring, which is offset to the shaft and therefore clamping forces are provided. Like a bushing, the U-Clip is pushed forward against the to be fixed component and it automatically locks into position. To release, just pull the clamping ring towards the user (UC 10-16) or press at the side button (UC 20-22).
Main advantages of Uhing U-Clip: