Robotic Automation Solutions
In partnership with COBOTSYS from Korea, we provide affordable Automation Solutions involving Robotics, via System Integration and Redesign of Work Processes.
Indy7 Cobot
7kg payload Cobot with 800mm reach. Smart and connected, the first step towards automating your processes. An easy and safe low-cost solution.
Delta Robot
Neuromeka's Delta is the world-class high speed high precision 4-axes Robot based on custom vibration suppression design.
RG Series
The RG series of Rolling Ring Drives are the original aluminum bodied traversal units. They are friction drives which convert the constant rotation of a plain round shaft into reciprocating motion. A unique technology first invented by Uhing from Germany, widely used in the Wire and Cable Winding industry.
RGK Series
The RGK series of Rolling Ring Drives are the latest generation of high-tech plastic bodied traversal units. Designed and built to be cost effective, their durability upholds proudly the brand of quality that Uhing has built over the decades.
RS Series
Uhing Linear Drive Nuts (RS) are non-positive drives which convert the rotation of a plain round shaft into linear motion. This effect is achieved by pressing specially crowned Rolling Rings against the shaft and allowing them to roll on the surface of the shaft at an angle which determines the pitch.
Easylock
Fast action clamping system for rolls, spools and static application. The Uhing Easylock is fitted with a clamping ring which is increasingly offset to the shaft with which engages in response to axial or tensioning forces, so creating an increasing friction contact. The greater the tensioning force, the greater is the clamping effect of the ring.
U-Clip
Shaft collar for smooth shafts/tubes. The Uhing U-Clip is the simple and low-priced version of the Uhing clamping systems. It uses a clamping ring, which is offset to the shaft and therefore clamping forces are provided. Like a bushing, the U-Clip is pushed forward against the to be fixed component and it automatically locks into position. To release, just pull the clamping ring towards the user (UC 10-16) or press at the side button (UC 20-22).
AZ1040
The Uhing® Timing Belt Drives are based on rigid aluminium sections that are resistant to torsion.
UniSlide
UniSlides are available in nearly 1000 standard models, all built to order. Customer are not limited
TADC Economical Stages
Developed from Sigma Koki’s performance-proven all-in-one guide with high rigidity.
TSDH General Purpose Stages
High precision and rigidity for general applications, the TSDH Stainless Steel Stages prove to be versatile and cost-effective.
BiSlide
Strongly recommended for applications where long travel length and high loads are required in the applications.
SGSP Series
The SGSP Series of motorized stages incorporate 5 phase stepping motor and high-precision guide actuators to provide precise movements.
Vertical Handle
The theoretical maximum holding or clamping force of a toggle action device is achieved when the 3 pivot points are in a straight line. To make allowance for external forces due to vibration and changing load conditions in industrial applications, the proper amount of over-travel at the centre pivot point has been carefully calculated to yield maximum clamping pressure, while achieving a positive locking position.
Horizontal Handle
The theoretical maximum holding or clamping force of a toggle action device is achieved when the 3 pivot points are in a straight line. To make allowance for external forces due to vibration and changing load conditions in industrial applications, the proper amount of over-travel at the centre pivot point has been carefully calculated to yield maximum clamping pressure, while achieving a positive locking position.
Push / Pull
The theoretical maximum holding or clamping force of a toggle action device is achieved when the 3 pivot points are in a straight line. To make allowance for external forces due to vibration and changing load conditions in industrial applications, the proper amount of over-travel at the centre pivot point has been carefully calculated to yield maximum clamping pressure, while achieving a positive locking position.
Latch Type
The theoretical maximum holding or clamping force of a toggle action device is achieved when the 3 pivot points are in a straight line. To make allowance for external forces due to vibration and changing load conditions in industrial applications, the proper amount of over-travel at the centre pivot point has been carefully calculated to yield maximum clamping pressure, while achieving a positive locking position.
SPG-25
This unique air-gun attachment works more efficiently than a regular air-gun in dewatering, particles removal, cleaning etc.
SPG-40
This unique air-gun attachment works more efficiently than a regular air-gun in dewatering, particles removal, cleaning etc.
Steinel Hot Air Tools
This model is the top of the range in terms of versatility, durability and ergonomics. An extremely high level of power, formidable airflow and quality features leave you wanting for nothing. The easy-to-read LCD display integrated at the rear is always in view.
IndyEye
Deep learning based, high-performance vision solution IndyEye can be applied flexibly to any working environment.